MoreExam
1. Question Content...
EXPLANATION
Answer: X - EXPLANATION Content.
Question1: Scenario: A Citrix Architect needs to assess an existing NetScaler configuration. The customer recently found that certain user groups were receiving access to an internal web server with an authorization configuration that does NOT align with the designed security requirements.Click the Exhibit button view the configured authorization settings for the web server.Which item should the architect change or remove to align the authorization configuration with the security requirements of the organization?
Question2: Which encoding type can a Citrix Architect use to encode the StyleBook content, when importing the StyleBook configuration under source attribute?
Question3: A Citrix Architect can execute a configuration job using a DeployMasterConfiguration template on a Citrix ADC _________deployed_________. (Choose the correct option to complete sentence.)
Question4: Scenario: A Citrix Engineer is asked by management at the workspacelab organization to review their existing Citrix ADC Configurations and make the necessary upgrades. The architect recommends small changes to the pre-existing Citrix ADC configuration. Currently, the Citrix ADC MPX devices are configured in high-availability pair, and the outbound traffic is load balanced between two internet service providers (ISPs), however, the failover is NOT happening correctly. The following requirements were discussed during the design requirement phase:* The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.* The link should fail over even if the ISP router is up and intermediary devices to an ISP router are down.* Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should not flow through both routers simultaneously.What should the architect configure with Link Load Balancing LLB) to meet the requirement?
Question5: Scenario: A Citrix Architect has sent the following request to the NetScaler:Which response would indicate the successful execution of the NITRO command?
Question6: Which parameter must a Citrix Architect configure to ensure that HDX Proxy Connection terminates upon AAA Session TimeOut?
Question7: Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.They captured the following requirements during the design discussion held for a Citrix ADC design project:* All three (3) Workspacelab sites (DC, NDR, and DR) will have similar Citrix ADC configurations and design.* Both external and internal Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode.* GSLB should resolve both A and AAA DNS queries.* In the GSLB deployment, the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site.* When the external Citrix ADC replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.* On the internal Citrix ADC, both the front-end VIP and backend SNIP will be part of the same subnet.* The external Citrix ADC will act as default gateway for the backend servers.* All three (3) sites, DC, NDR, and DR, will have two (2) links to the Internet from different service providers configured in Active/Standby mode.Which design decision must the architect make the design requirements above?
Question8: Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.They captured the following requirements during the design discussion held for a Citrix ADC design project:* All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configurations and design.* Both external and internal NetScaler MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode.* GSLB should resolve both A and AAA DNS queries.* In the GSLB deployment, the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site.* When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.* On the internal NetScaler, both the front-end VIP and backend SNIP will be part of the same subnet.* The external NetScaler will act as default gateway for the backend servers.* All three (3) sites, DC, NDR, and DR, will have two (2) links to the Internet from different service providers configured in Active/Standby mode.Which design decision must the architect make the design requirements above?
Question9: Which parameter must a Citrix Architect configure to ensure that HDX Proxy Connection terminates upon AAA Session TimeOut?
Question10: Which step does a Citrix Architect need to ensure during the Define phase when following the Citrix Methodology?
Question11: A Citrix Architect needs to configure advanced features of Citrix ADC by using StyleBooks as a resource in the Heat service.What is the correct sequence of tasks to be completed for configuring Citrix ADC using the Heat stack?
Question12: Scenario: A Citrix Architect has sent the following request to the NetScaler:Which response would indicate the successful execution of the NITRO command?
Question13: Scenario: A Citrix Architect needs to assess an existing NetScaler gateway deployment. During the assessment, the architect collected key requirements for VPN users, as well as the current session profile settings that are applied to those users.Click the Exhibit button to view the information collected by the architect.Which configuration should the architect change to meet all the stated requirements?
Question14: Scenario: A Citrix Architect has deployed two MPX devices, 12.0.53.13 nc and MPX 11500 models, in high availability (HA) pair for the Workspace labs team. The deployment method is two-arm and the devices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following features on the NetScaler devices. Content Switching, SSL Offloading, Load Balancing, NetScaler Gateway, Application Firewall in hybrid security and Appflow. All are enabled to send monitoring information to NMAS 12.0.53.13 nc build. The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.The following requirements were discussed during the implementation:* All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration* All traffic should be secured and any traffic coming into HTTP should be redirected to HTTPS.* Single Sign-on should be created for Microsoft Outlook web access (OWA).* NetScaler should recognize Uniform Resource Identifier (URl) and close the session to NetScaler when users hit the Logoff button in Microsoft Outlook web access.* Users should be able to authenticate using either user principal name (UPN) or sAMAccountName.* The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL Which monitor will meet these requirements?
Question15: Scenario: A Citrix Architect needs to deploy a Citrix ADC appliance for Workspacelab, which will provide application load balancing services to Partnerlab and Vendorlab.The setup requirements are as follows:* A pair of Citrix ADC MPX appliances will be deployed in the DMZ network.* High availability will be accessible on the Citrix ADC MPX in the DMZ Network.* Load balancing should be performed for the mail servers for Partnerlab and Vendorlab.* The traffic for both of the organizations must be isolated.* Separate Management accounts must be available for each client.* The load-balancing IP addresses must be identical.* A separate VLAN must be utilized for communication for each client.Which solution can the architect utilize to meet the requirements?
Question16: A Citrix Architect has deployed NetScaler Management and Analytics System (NMAS) to monitor a high availability pair of NetScaler VPX devices.The architect needs to deploy automated configuration backup to meet the following requirements:* The configuration backup file must be protected using a password.* The configuration backup must be performed each day at 8:00 AM GMT.* The configuration backup must also be performed if any changes are made in the ns.conf file.* Once the transfer is successful, auto-delete the configuration file from the NMAS.Which SNMP trap will trigger the configuration file backup?
Question17: Which session parameter does the default authorization setting control when authentication, authorization, and auditing profiles are configured?
Question18: Which three parameters must a Citrix Architect designate when creating a new session policy? (Choose three.)
Question19: Scenario: A Citrix Architect and a team of Workspacelab members have met for a design discussion about the NetScaler Design Project. They captured the following requirements:* Two pairs of NetScaler MPX appliances will be deployed in the DMZ network and the internal network.* High availability will be accessible between the pair of NetScaler MPX appliances in the DMZ network.* Multi-factor authentication must be configured for the NetScaler Gateway virtual server.* The NetScaler Gateway virtual server is integrated with XenApp/XenDesktop environment.* Load balancing must be deployed for the users from the workspacelab.com and vendorlab.com domains.* The logon page must show the workspacelab logo.* Certificate verification must be performed to identify and extract the username.* The client certificate must have UserPrincipalName as a subject.* All the managed workstations for the workspace users must have a client identifications certificate installed on it.* The workspacelab users connecting from a managed workstation with a client certificate on it should be authenticated using LDAP.* The workspacelab users connecting from a workstation without a client certificate should be authenticated using LDAP and RADIUS.* The vendorlab users should be authenticated using Active Directory Federation Service.* The user credentials must NOT be shared between workspacelab and vendorlab.* Single Sign-on must be performed between StoreFront and NetScaler Gateway.* A domain drop down list must be provided if the user connects to the NetScaler Gateway virtual server externally.* The domain of the user connecting externally must be identified using the domain selected from the domain drop down list.On performing the deployment, the architect observes that users are always prompted with two-factor authentication when trying to assess externally from an unmanaged workstation.Click the exhibit button to view the configuration.What should the architect do to correct this configuration?
Question20: Which two features are supported on LbaaSV1? (Choose two.)
Question21: Which two parameters must a Citrix Architect specify in the configuration job to replicate a specific configuration snippet from one Crtnx ADC instance to multiple instances? (Choose two.)
Question22: Scenario: A Citrix Architect needs to assess an existing NetScaler gateway deployment. During the assessment, the architect collects key requirements for different user groups, as well as the current session profile settings that are applied to those users.Click the Exhibit button to view the information collected by the architect.Which configuration should the architect make to meet these requirements?
Question23: Scenario: A Citrix Architect needs to assess an existing on-premises NetScaler deployment which includes Advanced Endpoint Analysis scans. During a previous security audit, the team discovered that certain endpoint devices were able to perform unauthorized actions despite NOT meeting pre-established criteria.The issue was isolated to several endpoint analysis (EPA) scan settings.Click the Exhibit button to view the endpoint security requirements and configured EPA policy settings.Which setting is preventing the security requirements of the organization from being met?
Question24: Scenario: A Citrix Architect observes the following configurations while performing an assessment of a Citrix ADC deployment:* Citrix Gateway virtual server nsg-dmz-001 is configured in ICA Proxy mode.* The authentication method used is Plaintext LDAP.* The session policies bound are configured to integrate with StoreFront in ICA proxy mode to perform Single Sign-on.* The connection to LDAP server is performed using SNIP by Citrix ADC.* To meet the new design requirement the architect needs to change the SNIP used for communication with LDAP servers.Which AAA parameter must the architect verify to update the source IP address for the communication from Citrix ADC to the LDAP server?
Question25: A Citrix Architect needs to configure advanced features of NetScaler by using StyleBooks as a resource in the Heat service.What is the correct sequence of tasks to be completed for configuring NetScaler using the Heat stack?
Question26: Scenario: A Citrix Architect needs to assess an existing NetScaler gateway deployment. During the assessment, the architect collects key requirements for different user groups, as well as the current session profile settings that are applied to those users.Click the Exhibit button to view the information collected by the architect.Which configuration should the architect make to meet these requirements?
Question27: Scenario: A Citrix Architect has deployed two MPX devices, 12.0.53.13 nc and MPX 11500 models, in high availability (HA) pair for the Workspace labs team. The deployment method is two-arm and the devices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following features on the NetScaler devices. Content Switching, SSL Offloading, Load Balancing, NetScaler Gateway, Application Firewall in hybrid security and Appflow. All are enabled to send monitoring information to NMAS 12.0.53.13 nc build.The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.The following requirements were discussed during the implementation:* All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration* All traffic should be secured and any traffic coming into HTTP should be redirected to HTTPS.* Single Sign-on should be created for Microsoft Outlook web access (OWA).* NetScaler should recognize Uniform Resource Identifier (URl) and close the session to NetScaler when users hit the Logoff button in Microsoft Outlook web access.* Users should be able to authenticate using either user principal name (UPN) or sAMAccountName.* The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL Which monitor will meet these requirements?
Question28: Scenario: A Citrix Architect needs to deploy a NetScaler appliance for Workspacelab, which will provide application load balancing services to Partnerlab and Vendorlab.The setup requirements are as follows:* A pair of NetScaler MPX appliances will be deployed in the DMZ network.* High availability will be accessible on the NetScaler MPX in the DMZ Network.* Load balancing should be performed for the mail servers for Partnerlab and Vendorlab.* The traffic for both of the organizations must be isolated.* Separate Management accounts must be available for each client.* The load-balancing IP addresses must be identical.* A separate VLAN must be utilized for communication for each client.Which solution can the architect utilize to meet the requirements?
Question29: Scenario: A Citrix Architect needs to assess an existing NetScaler Gateway deployment. During the assessment, the architect collected key requirements for VPN users, as well as the current session profile settings that are applied to those users.Click the Exhibit button to view the information collected by the architect.Which configurations should the architect change to meet all the stated requirements?
Question30: Scenario: A Citrix Architect has met with a team of Workspacelab members for a design discussion They have captured the following requirements for the Citrix ADC design project:The authentication must be deployed for the users from the workspacelab com and vendorlab com domains.* The workspacelab users connecting from the internal (workspacelab) network should be authenticated using LDAP* The workspacelab users connecting from the external network should be authenticated using LDAP and RADIUS.* The vendorlab users should be authenticated using Active Directory Federation Service* The user credentials must NOT be shared between workspacelab and vendorlab* Single Sign-on must be performed between StoreFront and Citrix Gateway* A domain drop down list must be provided if the user connects to the Citrix Gateway virtual server externally Which method must the architect utilize for user management between the two domains?
Question31: Which two NetScaler cookies indicate the validity of the Authentication, Authorization and Accounting (AAA) session for users? (Choose two.)
Question32: Scenario: A Citrix Architect has setup Citrix ADC MPX devices in high availability mode with version12.0.53.13 nc. These are placed behind a Cisco ASA 5505 firewall. The Cisco ASA firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall. The following requirements were captured by the architect during the discussion held as part of the Citrix ADC security implementation project with the customer's security team: The Citrix ADC MPX device:* should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The Citrix ADC device should be able to stop the HTTP. TOP, and DNS based requests.* needs to protect backend servers from overloading.* needs to queue all the incoming requests on the virtual server level instead of the service level.* should provide access to resources on the basis of priority.* should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets. compromised webservers, known spammersThackers. and phishing proxies.* should provide flexibility to enforce the desired level of security check inspections for the requests originating from a specific geolocation database.* should block the traffic based on predetermined header length, URL length, and cookie length.The device should ensure that characters such as a single straight quote (') backslash (); and semicolon (;) are either blocked, transformed, or dropped being sent to the backend server.Which security feature should the architect implement to meet these requirements?
Question33: Scenario: A Citrix Architect needs to conduct a capabilities assessment for an organization that wants to create a new Citrix ADC deployment. One of the organization's core business drivers is to ensure that key applications are always available to users.Which capabilities must the architect verify to assess if the requirement is feasible with the current infrastructure?
Question34: Scenario: A Citrix Architect needs to assess an existing NetScaler Gateway deployment. During the assessment, the architect collected key requirements for VPN users, as well as the current session profile settings that are applied to those users.Click the Exhibit button to view the information collected by the architect.Which configurations should the architect change to meet all the stated requirements?
Question35: Scenario: A Citrix Architect has set up NetScaler MPX devices in high availability mode with version12.0.53.13 nc. These are placed behind a Cisco ASA 5505 Firewall. The Cisco ASA Firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall.The following requirements were captured by the architect during the discussion held as part of the NetScaler security implementation project with the customer's security team:The NetScaler MPX device:* should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The NetScaler device should be able to stop the HTTP, TCP, and DNS based requests.* needs to protect backend servers from overloading.* needs to queue all the incoming requests on the virtual server level instead of the service level.* should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets, compromised webservers, known spammers/hackers, and* phishing proxies.* should provide flexibility to enforce the decided level of security check inspections for the requests originating from a specific geolocation database.* should block the traffic based on a pre-determined header length, URL length, and cookie length. The device should ensure that characters such as a single straight quote ("); backslash (\); and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.Which security feature should the architect configure to meet these requirements?
Question36: Scenario: A Citrix Architect needs to deploy Single Sign-on form-based authentication through Citrix ADC for Outlook Web Access (OWA) 2013 for the users of the domain workspacelab com The Single Sign-on (SSO) must be performed based on sAMAccountName.Which SSO action can the architect use to meet this requirement?
Question37: Scenario: Based on a discussion between a Citrix Architect and team of Workspacelab has been created across three (3) sites.They captured the following requirements during the design discussion held for NetScaler design projects:* All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configuration and design.* Both external and internal NetScaler MPX appliances will have Global Server Load balancing (GSLB) configured and deployed in Active/Passive mode.* GSLB should resolve both A and AAA DNS queries.* In the GSLB deployment, the NDR site will act as backup for the DC site. whereas the DR site will act as backup for the NDR site.* When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.* On the internal NetScaler, both front-end VIP and back-end SNIP will be part of the same subnet.* USIP is configured on the DMZ NetScaler appliances.* The external NetScaler will act default gateway for back-end servers.* All three (3) sites (DC, NDR, and DR) will have two (2) links to the Internet from different service providers configured in Active/Standby mode.Which design decision must the architect make to meet the design requirements above?
Question38: Scenario: A Citrix Architect needs to configure a Content Switching virtual server to provide access to www.workspacelab.com. However, the architect observes that whenever the user tries to access www.worksapcelab.com/CITRIX/WEB, the user receives a "503 - Service Unavailable" response. The configuration snippet is as follows:What should the architect modify to resolve this issue?
Question39: Scenario: A Citrix Architect has implemented two high availability pairs of MPX 5500 and MPX 11500 devices respectively with 12.0.53.13 nc version. The NetScaler devices are set up to handle NetScaler Gateway, Load Balancing, Application Firewall, and Content Switching. The Workspacelab infrastructure is set up to be monitored with NMAS version 12.0.53.13 nc by the Workspacelab administrators. The Workspacelab team wants to implement one more pair of NetScaler MPX 7500 devices with version12.0.53.13 nc.The Citrix consulting team has assigned the task to implement these NetScaler devices in the infrastructure and set them up to be monitored and managed by NMAS.The following are the requirements that were discussed during the project initiation call:* NMAS should be configured to get the infrastructure information under sections such as HDX Insight, WEB Insight, and Security Insight.* Configuration on the new MPX devices should be identical to MPX 11500 devices.* Configuration changes after the deployment and initial setup should be optimized using NMAS.* NMAS should be utilized to configure templates that can be utilized by the Workspacelab team in future deployment.* As per the requirement from the Workspacelab team, NMAS should be store the audited data for only15 days.Which process should the architect utilize to ensure that the deployment of MPX 11500 devices are optimized and that it is correct, before deploying the devices in production?
Question40: A Citrix Architect has deployed Citrix Application Delivery Management to monitor a high availability pair of Citrix ADC VPX devices.The architect needs to deploy automated configuration backup to meet the following requirements:* The configuration backup file must be protected using a password.* The configuration backup must be performed each day at 8:00 AM GMT.* The configuration backup must also be performed if any changes are made in the ns.conf file.* Once the transfer is successful, auto-delete the configuration file from the NMAS.Which SNMP trap will trigger the configuration file backup?
Question41: Which two methods can a Citrix Architect use to create a Heat Orchestration template? (Choose two)
Question42: A Citrix Architect can execute a configuration job using a DeployMasterConfiguration template on a NetScaler_________deployed_________. (Choose the correct option to complete sentence.)
Question43: Scenario: A Citrix Architect has set up NetScaler MPX devices in high availability mode with version 12.0.53.13 nc. These are placed behind a Cisco ASA 5505 Firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall.The following requirements were captured by the architect during the discussion held as part of the NetScaler security implementation project with the customer's security team:The NetScaler device:* Should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The NetScaler device should be able to stop the HTTP, TCP, and DNS based requests.* Needs to protect backend servers from overloading.* Needs to queue all the incoming requests on the virtual server level instead of the service level.* Should provide access to resources on the basis of priority.* Should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets, compromised webservers, known spammers/hackers, and phishing proxies.* Should provide flexibility to enforce the desired level of security check inspections for the requests originating from a specific geolocation database.* Should block the traffic based on a pre-determined header length, URL length, and cookie length. The device should ensure that characters such as a single straight quote (*); backslash(\), and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.Which two security features should the architect configure to meet these requirements? (Choose two.)
Question44: Scenario: A Citrix Architect holds a design discussion with a team of Workspacelab members, and they capture the following requirements for the Citrix ADC design project:* A pair of Citrlx ADC MPX appliances will be deployed in the DMZ network and another pair in the internal network.* High availability will be accessible between the pair of Citrix ADC MPX appliances in the DMZ network.* Multi-factor authentication must be configured for the Citrix Gateway virtual server.* The Citrix Gateway virtual server is integrated with the StoreFront server.* Load balancing must be configured for the StoreFront server. *Authentication must be deployed for users from the workspacelab.com domain.* The Workspacelab users should be authenticated using Cert Policy and LDAP.* All the client certificates must be SHA 256-signed, 2048 bits, and have UserPrincipalName as the subject.* Single Sign-on must be performed between StoreFront and Citrix Gateway. After deployment the architect observes that LDAP authentication is failing.Click the Exhibit button to review the output of aaad.debug and the configuration of the authentication policy.What is causing this issue?
Question45: Scenario: A Citrix Architect needs to design a new NetScaler Gateway deployment to provide secure RDP access to backend Windows machines.Click the Exhibit button to view additional requirements collected by the architect during the design discussions.To meet the customer requirements, the architect should deploy the RDP proxy through _______, using a_________ solution. (Choose the correct option to complete the sentence.)
Question46: Scenario: A Citrix Architect and a team of Workspacelab members have met for a design discussion about the NetScaler Design Project. They captured the following requirements:* Two pairs of NetScaler MPX appliances will be deployed in the DMZ network and the internal network.* High availability will be accessible between the pair of NetScaler MPX appliances in the DMZ network.* Multi-factor authentication must be configured for the NetScaler Gateway virtual server.* The NetScaler Gateway virtual server is integrated with XenApp/XenDesktop environment.* Load balancing must be deployed for the users from the workspacelab.com and vendorlab.com domains.* The logon page must show the workspacelab logo.* Certificate verification must be performed to identify and extract the username.* The client certificate must have UserPrincipalName as a subject.* All the managed workstations for the workspace users must have a client identifications certificate installed on it.* The workspacelab users connecting from a managed workstation with a client certificate on it should be authenticated using LDAP.* The workspacelab users connecting from a workstation without a client certificate should be authenticated using LDAP and RADIUS.* The vendorlab users should be authenticated using Active Directory Federation Service.* The user credentials must NOT be shared between workspacelab and vendorlab.* Single Sign-on must be performed between StoreFront and NetScaler Gateway.* A domain drop down list must be provided if the user connects to the NetScaler Gateway virtual server externally.* The domain of the user connecting externally must be identified using the domain selected from the domain drop down list.On performing the deployment, the architect observes that users are always prompted with two-factor authentication when trying to assess externally from an unmanaged workstation.Click the exhibit button to view the configuration.What should the architect do to correct this configuration?
Question47: Which response is returned by the Citrix ADC, if a negative response is present in the local cache?
Question48: Scenario: A Citrix Architect and a team of Workspacelab members met to discuss a NetScaler design project.They captured the following requirements from this design discussion:* A pair of NetScaler MPX appliances will be deployed in the DMZ network.* High Availability will be accessible in the NetScaler MPX in the DMZ Network.* Load balancing should be performed for the internal network services like Microsoft Exchange Client Access Services and Microsoft App-V.* The load balancing should be performed for StoreFront.* The NetScaler Gateway virtual server will be utilizing the StoreFront load-balancing virtual server.* The NetScaler Gateway virtual server and StoreFront.* The NetScaler Gateway virtual service and StoreFront and load-balancing services are publicly accessible.* The traffic for internal and external services must be isolated.Click the Exhibit button to review the logical network diagram.Which two design decisions are incorrect based on these requirements? (Choose two.)
Question49: Scenario: A Citrix Architect and a team of Workspacelab members met to discuss requirements during the design discussion for a Citrix ADC design project. Specifically, the existing Citrix ADC Configuration must be modified to meet the following authentication conditions:* Provide users with domain drop-down page* If the users select workspacelab.com. perform single factor authentication using LDAP* It the users select AAATM.COM, perform two factor authentication using LDAP and RADIUS* If the users select NSI-TEST. COM. perform SAML authentication using ADFS What should the architect use to bind the AAA virtual server to the Citrix Gateway virtual server?
Question50: Which two features are supported on LbaaSV1? (Choose two.)
Question51: Scenario: A Citrix Architect has deployed Authentication for the SharePoint server through NetScaler. In order to ensure that users are able to edit or upload documents, the architect has configured persistent cookies on the NetScaler profile.Which action should the architect take to ensure that cookies are shared between the browser and non-browser applications?
Question52: Scenario: A Citrix Architect needs to assess an existing NetScaler gateway deployment. During the assessment, the architect collected key requirements for VPN users, as well as the current session profile settings that are applied to those users.Click the Exhibit button to view the information collected by the architect.Which configuration should the architect change to meet all the stated requirements?
Question53: Which two settings must a Citrix Architect enable to deploy a shared VLAN on Citrix ADC VPX instance on an ESX platform? (Choose two.)
Question54: Which business driver would motivate a Citrix Architect to use the full range of security features on the Citrix ADC to allow for the removal of third party firewalls, proxy devices and multiple URLs?
Question55: Scenario: A Citrix Architect needs to design a new NetScaler Gateway deployment to provide secure RDP access to backend Windows machines.Click the Exhibit button to view additional requirements collected by the architect during the design discussions.To meet the customer requirements, the architect should deploy the RDP proxy through ______ using a________ solution. (Choose the correct option to complete the sentence.)
Question56: Scenario: A Citrix Architect needs to configure a full VPN session profile to meet the following requirements:* Users should be able to send the traffic only for the allowed networks through the VPN tunnel.* Only the DNS requests ending with the configured DNS suffix workspacelab.com must be sent to NetScaler Gateway.* If the DNS query does NOT contain a domain name, then DNS requests must be sent to NetScaler gateway.Which settings will meet these requirements?
Question57: Scenario: A Citrix Architect needs to design a new Citrix ADC Gateway deployment to provide secure RDP access to backend Windows machines.Click the Exhibit button to view additional requirements collected by the architect during the design discussions.To meet the customer requirements, the architect should deploy the RDP proxy through _______, using a_________ solution. (Choose the correct option to complete the sentence.)
Question58: A Citrix Architect needs to evaluate and define the architecture and operational processes required to implement and maintain the production environment. In which two phases of the Citrix Methodology will the architect define this? (Choose two.)
Question59: Scenario: A Citrix Architect has deployed an authentication setup with a ShareFile load-balancing virtual server. The NetScaler is configured as the Service Provider and Portalguard server is utilized as the SAML Identity Provider. While performing the functional testing, the architect finds that after the users enter their credentials on the logon page provided by Portalguard, they get redirected back to the Netscaler Gateway page at uri /cgi/samlauth/ and receive the following error.The events in the /var/log/ns.log at the time of this issue are as follows:What should the architect change in the SAML action to resolve this issue?
Question60: Scenario: A Citrix Architect has executed the following commands on the Citrix ADC:In which scenario will the timeout work as configured?
Question61: Scenario: A Citrix Architect needs to design a new Citrix Gateway deployment. During the design discussions, the architect documents the key requirements about when to provide VPN access for incoming connections to the Citrix Gateway virtual server. Click the Exhibit button to view the requirements.Which policy expression will meet these requirements?
